view Bootloader/dfu.c @ 308:ab4515606277

Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
author Rowan Decker <Smasher816@gmail.com>
date Sun, 08 Mar 2015 18:40:01 -0700
parents b091bb09c55f
children f4d4cad283c6
line wrap: on
line source

/* Copyright (c) 2011,2012 Simon Schubert <2@0x2c.org>.
 * Modifications by Jacob Alexander 2014 <haata@kiibohd.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

// ----- Local Includes -----

#include "usb.h"
#include "dfu.h"



// ----- Functions -----

void dfu_write_done( enum dfu_status err, struct dfu_ctx *ctx )
{
	ctx->status = err;
	if (ctx->status == DFU_STATUS_OK) {
		switch (ctx->state) {
		case DFU_STATE_dfuDNBUSY:
			ctx->state = DFU_STATE_dfuDNLOAD_IDLE;
			break;
		default:
			break;
		}
	} else {
		ctx->state = DFU_STATE_dfuERROR;
	}
}

static void dfu_dnload_complete( void *buf, ssize_t len, void *cbdata )
{
	struct dfu_ctx *ctx = cbdata;

	if (len > 0)
		ctx->state = DFU_STATE_dfuDNBUSY;
	else
		ctx->state = DFU_STATE_dfuMANIFEST;
	ctx->status = ctx->finish_write(buf, ctx->off, len);
	ctx->off += len;
	ctx->len = len;

	if (ctx->status != DFU_STATUS_async)
		dfu_write_done(ctx->status, ctx);

	usb_handle_control_status(ctx->state == DFU_STATE_dfuERROR);
}

static void dfu_reset_system( void *buf, ssize_t len, void *cbdata )
{
	SOFTWARE_RESET();
}

static int dfu_handle_control( struct usb_ctrl_req_t *req, void *data )
{
	struct dfu_ctx *ctx = data;
	int fail = 1;

	switch ((enum dfu_ctrl_req_code)req->bRequest) {
	case USB_CTRL_REQ_DFU_DNLOAD: {
		void *buf;

		switch (ctx->state) {
		case DFU_STATE_dfuIDLE:
			ctx->off = 0;
			break;
		case DFU_STATE_dfuDNLOAD_IDLE:
			break;
		default:
			goto err;
		}

		/**
		 * XXX we are not allowed to STALL here, and we need to eat all transferred data.
		 * better not allow setup_write to break the protocol.
		 */
		ctx->status = ctx->setup_write(ctx->off, req->wLength, &buf);
		if (ctx->status != DFU_STATUS_OK) {
			ctx->state = DFU_STATE_dfuERROR;
			goto err_have_status;
		}

		if (req->wLength > 0)
			usb_ep0_rx(buf, req->wLength, dfu_dnload_complete, ctx);
		else
			dfu_dnload_complete(NULL, 0, ctx);
		goto out_no_status;
	}
	case USB_CTRL_REQ_DFU_GETSTATUS: {
		struct dfu_status_t st;

		st.bState = ctx->state;
		st.bStatus = ctx->status;
		st.bwPollTimeout = 1000; /* XXX */
		/**
		 * If we're in DFU_STATE_dfuMANIFEST, we just finished
		 * the download, and we're just about to send our last
		 * status report.  Once the report has been sent, go
		 * and reset the system to put the new firmware into
		 * effect.
		 */
		usb_ep0_tx_cp(&st, sizeof(st), req->wLength, NULL, NULL);
		if (ctx->state == DFU_STATE_dfuMANIFEST) {
			usb_handle_control_status_cb(dfu_reset_system);
			goto out_no_status;
		}
		break;
	}
	case USB_CTRL_REQ_DFU_CLRSTATUS:
		ctx->state = DFU_STATE_dfuIDLE;
		ctx->status = DFU_STATUS_OK;
		break;
	case USB_CTRL_REQ_DFU_GETSTATE: {
		uint8_t st = ctx->state;
		usb_ep0_tx_cp(&st, sizeof(st), req->wLength, NULL, NULL);
		break;
	}
	case USB_CTRL_REQ_DFU_ABORT:
		switch (ctx->state) {
		case DFU_STATE_dfuIDLE:
		case DFU_STATE_dfuDNLOAD_IDLE:
		/* case DFU_STATE_dfuUPLOAD_IDLE: */
			ctx->state = DFU_STATE_dfuIDLE;
			break;
		default:
			goto err;
		}
		break;
	/* case USB_CTRL_REQ_DFU_UPLOAD: */
	default:
		return (0);
	}

	fail = 0;
	goto out;

err:
	ctx->status = DFU_STATUS_errSTALLEDPKT;
err_have_status:
	ctx->state = DFU_STATE_dfuERROR;
out:
	usb_handle_control_status(fail);
out_no_status:
	return (1);
}

void dfu_init( dfu_setup_write_t setup_write, dfu_finish_write_t finish_write, struct dfu_ctx *ctx )
{
	ctx->state = DFU_STATE_dfuIDLE;
	ctx->setup_write = setup_write;
	ctx->finish_write = finish_write;
	usb_attach_function(&dfu_function, &ctx->header);
}

const struct usbd_function dfu_function = {
	.control = dfu_handle_control,
	.interface_count = USB_FUNCTION_DFU_IFACE_COUNT,
};