Mercurial > louis > kiibohd-controller
view Output/pjrcUSB/avr/usb_keyboard_serial.h @ 308:ab4515606277
Fix whitespace
Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
| author | Rowan Decker <Smasher816@gmail.com> |
|---|---|
| date | Sun, 08 Mar 2015 18:40:01 -0700 |
| parents | d5bf41d7f7ef |
| children | 66eccdd9ced5 |
line wrap: on
line source
/* USB Keyboard and CDC Serial Device for Teensy USB Development Board * Copyright (c) 2009 PJRC.COM, LLC * Modifications by Jacob Alexander (2011-2014) * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #ifndef usb_keyboard_serial_h__ #define usb_keyboard_serial_h__ // ----- Includes ----- // Compiler Includes #include <stdint.h> // AVR Includes #include <avr/io.h> #include <avr/pgmspace.h> #include <avr/interrupt.h> #include <avr/wdt.h> // AVR Util Includes #include <util/delay.h> // Local Includes #include "output_com.h" // ----- Function Declarations ----- // Basic USB Configuration uint8_t usb_init(); // initialize everything uint8_t usb_configured(); // is the USB port configured // Keyboard HID Functions void usb_keyboard_send(); // Chip Level Functions void usb_device_reload(); // Enable firmware reflash mode // USB Serial CDC Functions int16_t usb_serial_getchar(); // receive a character (-1 if timeout/error) uint8_t usb_serial_available(); // number of bytes in receive buffer void usb_serial_flush_input(); // discard any buffered input // transmitting data int8_t usb_serial_putchar(uint8_t c); // transmit a character int8_t usb_serial_putchar_nowait(uint8_t c); // transmit a character, do not wait int8_t usb_serial_write(const char *buffer, uint16_t size); // transmit a buffer void usb_serial_flush_output(); // immediately transmit any buffered output // serial parameters uint32_t usb_serial_get_baud(); // get the baud rate uint8_t usb_serial_get_stopbits(); // get the number of stop bits uint8_t usb_serial_get_paritytype(); // get the parity type uint8_t usb_serial_get_numbits(); // get the number of data bits uint8_t usb_serial_get_control(); // get the RTS and DTR signal state int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc // ----- Macros ----- // Software reset the chip #define usb_device_software_reset() do { wdt_enable( WDTO_15MS ); for(;;); } while(0) // See EPSIZE -> UECFG1X - 128 and 256 bytes are for endpoint 1 only #define EP_SIZE(s) ((s) == 256 ? 0x50 : \ ((s) == 128 ? 0x40 : \ ((s) == 64 ? 0x30 : \ ((s) == 32 ? 0x20 : \ ((s) == 16 ? 0x10 : \ 0x00))))) #define LSB(n) (n & 255) #define MSB(n) ((n >> 8) & 255) // ----- Defines ----- // constants corresponding to the various serial parameters #define USB_SERIAL_DTR 0x01 #define USB_SERIAL_RTS 0x02 #define USB_SERIAL_1_STOP 0 #define USB_SERIAL_1_5_STOP 1 #define USB_SERIAL_2_STOP 2 #define USB_SERIAL_PARITY_NONE 0 #define USB_SERIAL_PARITY_ODD 1 #define USB_SERIAL_PARITY_EVEN 2 #define USB_SERIAL_PARITY_MARK 3 #define USB_SERIAL_PARITY_SPACE 4 #define USB_SERIAL_DCD 0x01 #define USB_SERIAL_DSR 0x02 #define USB_SERIAL_BREAK 0x04 #define USB_SERIAL_RI 0x08 #define USB_SERIAL_FRAME_ERR 0x10 #define USB_SERIAL_PARITY_ERR 0x20 #define USB_SERIAL_OVERRUN_ERR 0x40 #define EP_TYPE_CONTROL 0x00 #define EP_TYPE_BULK_IN 0x81 #define EP_TYPE_BULK_OUT 0x80 #define EP_TYPE_INTERRUPT_IN 0xC1 #define EP_TYPE_INTERRUPT_OUT 0xC0 #define EP_TYPE_ISOCHRONOUS_IN 0x41 #define EP_TYPE_ISOCHRONOUS_OUT 0x40 #define EP_SINGLE_BUFFER 0x02 #define EP_DOUBLE_BUFFER 0x06 #define MAX_ENDPOINT 4 #if defined(__AVR_AT90USB162__) #define HW_CONFIG() #define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0))) #define USB_CONFIG() (USBCON = (1<<USBE)) #define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) #elif defined(__AVR_ATmega32U4__) #define HW_CONFIG() (UHWCON = 0x01) #define PLL_CONFIG() (PLLCSR = 0x12) #define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) #define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) #elif defined(__AVR_AT90USB646__) #define HW_CONFIG() (UHWCON = 0x81) #define PLL_CONFIG() (PLLCSR = 0x1A) #define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) #define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) #elif defined(__AVR_AT90USB1286__) #define HW_CONFIG() (UHWCON = 0x81) #define PLL_CONFIG() (PLLCSR = 0x16) #define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) #define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) #endif // standard control endpoint request types #define GET_STATUS 0 #define CLEAR_FEATURE 1 #define SET_FEATURE 3 #define SET_ADDRESS 5 #define GET_DESCRIPTOR 6 #define GET_CONFIGURATION 8 #define SET_CONFIGURATION 9 #define GET_INTERFACE 10 #define SET_INTERFACE 11 // HID (human interface device) #define HID_GET_REPORT 1 #define HID_GET_IDLE 2 #define HID_GET_PROTOCOL 3 #define HID_SET_REPORT 9 #define HID_SET_IDLE 10 #define HID_SET_PROTOCOL 11 // CDC (communication class device) #define CDC_SET_LINE_CODING 0x20 #define CDC_GET_LINE_CODING 0x21 #define CDC_SET_CONTROL_LINE_STATE 0x22 // CDC Configuration // When you write data, it goes into a USB endpoint buffer, which // is transmitted to the PC when it becomes full, or after a timeout // with no more writes. Even if you write in exactly packet-size // increments, this timeout is used to send a "zero length packet" // that tells the PC no more data is expected and it should pass // any buffered data to the application that may be waiting. If // you want data sent immediately, call usb_serial_flush_output(). #define TRANSMIT_FLUSH_TIMEOUT 5 /* in milliseconds */ // If the PC is connected but not "listening", this is the length // of time before usb_serial_getchar() returns with an error. This // is roughly equivilant to a real UART simply transmitting the // bits on a wire where nobody is listening, except you get an error // code which you can ignore for serial-like discard of data, or // use to know your data wasn't sent. #define TRANSMIT_TIMEOUT 25 /* in milliseconds */ // ----- Endpoint Configuration ----- #define ENDPOINT0_SIZE 32 #define KEYBOARD_NKRO_INTERFACE 0 #define KEYBOARD_NKRO_ENDPOINT 1 #define KEYBOARD_NKRO_SIZE 64 #define KEYBOARD_NKRO_HID_BUFFER EP_DOUBLE_BUFFER #define KEYBOARD_INTERFACE 1 #define KEYBOARD_ENDPOINT 2 #define KEYBOARD_SIZE 8 #define KEYBOARD_HID_BUFFER EP_DOUBLE_BUFFER #define CDC_IAD_DESCRIPTOR 1 #define CDC_STATUS_INTERFACE 2 #define CDC_DATA_INTERFACE 3 #define CDC_ACM_ENDPOINT 3 #define CDC_RX_ENDPOINT 4 #define CDC_TX_ENDPOINT 5 #if defined(__AVR_AT90USB162__) #define CDC_ACM_SIZE 16 #define CDC_ACM_BUFFER EP_SINGLE_BUFFER #define CDC_RX_SIZE 32 #define CDC_RX_BUFFER EP_DOUBLE_BUFFER #define CDC_TX_SIZE 32 #define CDC_TX_BUFFER EP_DOUBLE_BUFFER #else #define CDC_ACM_SIZE 16 #define CDC_ACM_BUFFER EP_SINGLE_BUFFER #define CDC_RX_SIZE 64 #define CDC_RX_BUFFER EP_DOUBLE_BUFFER #define CDC_TX_SIZE 64 #define CDC_TX_BUFFER EP_DOUBLE_BUFFER #endif // Endpoint 0 is reserved for the control endpoint // Endpoint 1 has a 256 byte buffer // Endpoints 2-6 have 64 byte buffers static const uint8_t PROGMEM endpoint_config_table[] = { 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_NKRO_SIZE) | KEYBOARD_NKRO_HID_BUFFER, // 256 byte 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_HID_BUFFER, // 64 byte 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(CDC_ACM_SIZE) | CDC_ACM_BUFFER, // 64 byte 1, EP_TYPE_BULK_OUT, EP_SIZE(CDC_RX_SIZE) | CDC_RX_BUFFER, // 64 byte 1, EP_TYPE_BULK_IN, EP_SIZE(CDC_TX_SIZE) | CDC_TX_BUFFER, // 64 byte 0, // 64 byte }; // ----- Descriptor Configuration ----- // Descriptors are the data that your computer reads when it auto-detects // this USB device (called "enumeration" in USB lingo). The most commonly // changed items are editable at the top of this file. Changing things // in here should only be done by those who've read chapter 9 of the USB // spec and relevant portions of any USB class specifications! static const uint8_t PROGMEM device_descriptor[] = { 18, // bLength 1, // bDescriptorType 0x00, 0x02, // bcdUSB 0x00, // bDeviceClass - Composite device, 0x00 is required for Windows 0, // bDeviceSubClass 0, // bDeviceProtocol ENDPOINT0_SIZE, // bMaxPacketSize0 LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct 0x00, 0x01, // bcdDevice 1, // iManufacturer 2, // iProduct 3, // iSerialNumber 1 // bNumConfigurations }; // Specify only a single USB speed static const uint8_t PROGMEM device_qualifier_descriptor[] = { 0 }; // Disable USB debug descriptor static const uint8_t PROGMEM usb_debug_descriptor[] = { 0 }; // Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60 static const uint8_t PROGMEM keyboard_hid_report_desc[] = { // Keyboard Collection 0x05, 0x01, // Usage Page (Generic Desktop), 0x09, 0x06, // Usage (Keyboard), 0xA1, 0x01, // Collection (Application) - Keyboard, // Modifier Byte 0x75, 0x01, // Report Size (1), 0x95, 0x08, // Report Count (8), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0xE0, // Usage Minimum (224), 0x29, 0xE7, // Usage Maximum (231), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x81, 0x02, // Input (Data, Variable, Absolute), // Reserved Byte 0x75, 0x08, // Report Size (8), 0x95, 0x01, // Report Count (1), 0x81, 0x03, // Output (Constant), // LED Report 0x75, 0x01, // Report Size (1), 0x95, 0x05, // Report Count (5), 0x05, 0x08, // Usage Page (LEDs), 0x19, 0x01, // Usage Minimum (1), 0x29, 0x05, // Usage Maximum (5), 0x91, 0x02, // Output (Data, Variable, Absolute), // LED Report Padding 0x75, 0x03, // Report Size (3), 0x95, 0x01, // Report Count (1), 0x91, 0x03, // Output (Constant), // Normal Keys 0x75, 0x08, // Report Size (8), 0x95, 0x06, // Report Count (6), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x7F, // Logical Maximum(104), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0x00, // Usage Minimum (0), 0x29, 0x7F, // Usage Maximum (104), 0x81, 0x00, // Input (Data, Array), 0xc0, // End Collection - Keyboard }; // Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60 static const uint8_t PROGMEM keyboard_nkro_hid_report_desc[] = { // Keyboard Collection 0x05, 0x01, // Usage Page (Generic Desktop), 0x09, 0x06, // Usage (Keyboard), 0xA1, 0x01, // Collection (Application) - Keyboard, // LED Report 0x85, 0x01, // Report ID (1), 0x75, 0x01, // Report Size (1), 0x95, 0x05, // Report Count (5), 0x05, 0x08, // Usage Page (LEDs), 0x19, 0x01, // Usage Minimum (1), 0x29, 0x05, // Usage Maximum (5), 0x91, 0x02, // Output (Data, Variable, Absolute), // LED Report Padding 0x75, 0x03, // Report Size (3), 0x95, 0x01, // Report Count (1), 0x91, 0x03, // Output (Constant), // Normal Keys - Using an NKRO Bitmap // // NOTES: // Supports all keys defined by the spec, except 1-3 which define error events // and 0 which is "no keys pressed" // See http://www.usb.org/developers/hidpage/Hut1_12v2.pdf Chapter 10 // Or Macros/PartialMap/usb_hid.h // // 50 (ISO \ due to \ bug) and 156 (Clear due to Delete bug) must be excluded // due to a Linux bug with bitmaps (not useful anyways) // 165-175 are reserved/unused as well as 222-223 and 232-65535 // // Compatibility Notes: // - Using a second endpoint for a boot mode device helps with compatibility // - DO NOT use Padding in the descriptor for bitfields // (Mac OSX silently fails... Windows/Linux work correctly) // - DO NOT use Report IDs, Windows 8.1 will not update keyboard correctly (modifiers disappear) // (all other OSs, including OSX work fine...) // (you can use them *iff* you only have 1 per collection) // - Mac OSX and Windows 8.1 are extremely picky about padding // // Packing of bitmaps are as follows: // 4-49 : 6 bytes (0x04-0x31) ( 46 bits + 2 padding bits for 6 bytes total) // 51-155 : 14 bytes (0x33-0x9B) (105 bits + 6 padding bits for 15 bytes total) // 157-164 : 1 byte (0x9D-0xA4) ( 8 bits) // 176-221 : 6 bytes (0xB0-0xDD) ( 46 bits + 2 padding bits for 6 bytes total) // 224-231 : 1 byte (0xE0-0xE7) ( 8 bits) // Modifier Byte 0x75, 0x01, // Report Size (1), 0x95, 0x08, // Report Count (8), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0xE0, // Usage Minimum (224), 0x29, 0xE7, // Usage Maximum (231), 0x81, 0x02, // Input (Data, Variable, Absolute), // 4-49 (6 bytes/46 bits) - MainKeys 0x75, 0x01, // Report Size (1), 0x95, 0x2E, // Report Count (46), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0x04, // Usage Minimum (4), 0x29, 0x31, // Usage Maximum (49), 0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield), // Padding (2 bits) 0x75, 0x02, // Report Size (2), 0x95, 0x01, // Report Count (1), 0x81, 0x03, // Input (Constant), // 51-155 (14 bytes/105 bits) - SecondaryKeys 0x75, 0x01, // Report Size (1), 0x95, 0x69, // Report Count (105), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0x33, // Usage Minimum (51), 0x29, 0x9B, // Usage Maximum (155), 0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield), // Padding (7 bits) 0x75, 0x07, // Report Size (7), 0x95, 0x01, // Report Count (1), 0x81, 0x03, // Input (Constant), // 157-164 (1 byte/8 bits) - TertiaryKeys 0x75, 0x01, // Report Size (1), 0x95, 0x08, // Report Count (8), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0x9D, // Usage Minimum (157), 0x29, 0xA4, // Usage Maximum (164), 0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield), // 176-221 (6 bytes/46 bits) - QuartiaryKeys 0x75, 0x01, // Report Size (1), 0x95, 0x2E, // Report Count (46), 0x15, 0x00, // Logical Minimum (0), 0x25, 0x01, // Logical Maximum (1), 0x05, 0x07, // Usage Page (Key Codes), 0x19, 0xB0, // Usage Minimum (176), 0x29, 0xDD, // Usage Maximum (221), 0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield), // Padding (2 bits) 0x75, 0x02, // Report Size (2), 0x95, 0x01, // Report Count (1), 0x81, 0x03, // Input (Constant), 0xc0, // End Collection - Keyboard // System Control Collection // // NOTES: // Not bothering with NKRO for this table. If there's need, I can implement it. -HaaTa // Using a 1KRO scheme 0x05, 0x01, // Usage Page (Generic Desktop), 0x09, 0x80, // Usage (System Control), 0xA1, 0x01, // Collection (Application), 0x85, 0x02, // Report ID (2), 0x75, 0x08, // Report Size (8), 0x95, 0x01, // Report Count (1), 0x16, 0x81, 0x00, // Logical Minimum (129), 0x26, 0xB7, 0x00, // Logical Maximum (183), 0x19, 0x81, // Usage Minimum (129), 0x29, 0xB7, // Usage Maximum (183), 0x81, 0x00, // Input (Data, Array), 0xc0, // End Collection - System Control // Consumer Control Collection - Media Keys // // NOTES: // Not bothering with NKRO for this table. If there's a need, I can implement it. -HaaTa // Using a 1KRO scheme 0x05, 0x0c, // Usage Page (Consumer), 0x09, 0x01, // Usage (Consumer Control), 0xA1, 0x01, // Collection (Application), 0x85, 0x03, // Report ID (3), 0x75, 0x10, // Report Size (16), 0x95, 0x01, // Report Count (1), 0x16, 0x20, 0x00, // Logical Minimum (32), 0x26, 0x9C, 0x02, // Logical Maximum (668), 0x05, 0x0C, // Usage Page (Consumer), 0x19, 0x20, // Usage Minimum (32), 0x2A, 0x9C, 0x02, // Usage Maximum (668), 0x81, 0x00, // Input (Data, Array), 0xc0, // End Collection - Consumer Control }; // <Configuration> + <Keyboard HID> + <NKRO Keyboard HID> + <Serial CDC> #define CONFIG1_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7) #define KEYBOARD_HID_DESC_OFFSET (9 + 9) #define KEYBOARD_NKRO_HID_DESC_OFFSET (9 + 9+9+7 + 9) #define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7 + 9+9+7) static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = { // --- Configuration --- // - 9 bytes - // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10 9, // bLength; 2, // bDescriptorType; LSB(CONFIG1_DESC_SIZE), // wTotalLength MSB(CONFIG1_DESC_SIZE), 4, // bNumInterfaces 1, // bConfigurationValue 0, // iConfiguration 0x80, // bmAttributes 250, // bMaxPower // --- Keyboard HID --- // - 9 bytes - // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 9, // bLength 4, // bDescriptorType KEYBOARD_INTERFACE, // bInterfaceNumber 0, // bAlternateSetting 1, // bNumEndpoints 0x03, // bInterfaceClass (0x03 = HID) 0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot) 0x01, // bInterfaceProtocol (0x01 = Keyboard) 0, // iInterface // - 9 bytes - // HID interface descriptor, HID 1.11 spec, section 6.2.1 9, // bLength 0x21, // bDescriptorType 0x11, 0x01, // bcdHID 0, // bCountryCode - Setting to 0/Undefined 1, // bNumDescriptors 0x22, // bDescriptorType LSB(sizeof(keyboard_hid_report_desc)), // wDescriptorLength MSB(sizeof(keyboard_hid_report_desc)), // - 7 bytes - // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 7, // bLength 5, // bDescriptorType KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress 0x03, // bmAttributes (0x03=intr) KEYBOARD_SIZE, 0, // wMaxPacketSize 1, // bInterval // --- NKRO Keyboard HID --- // - 9 bytes - // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 9, // bLength 4, // bDescriptorType KEYBOARD_NKRO_INTERFACE, // bInterfaceNumber 0, // bAlternateSetting 1, // bNumEndpoints 0x03, // bInterfaceClass (0x03 = HID) 0x00, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot) 0x01, // bInterfaceProtocol (0x01 = Keyboard) 0, // iInterface // - 9 bytes - // HID interface descriptor, HID 1.11 spec, section 6.2.1 9, // bLength 0x21, // bDescriptorType 0x11, 0x01, // bcdHID 0, // bCountryCode - Setting to 0/Undefined 1, // bNumDescriptors 0x22, // bDescriptorType // wDescriptorLength LSB(sizeof(keyboard_nkro_hid_report_desc)), MSB(sizeof(keyboard_nkro_hid_report_desc)), // - 7 bytes - // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 7, // bLength 5, // bDescriptorType KEYBOARD_NKRO_ENDPOINT | 0x80, // bEndpointAddress 0x03, // bmAttributes (0x03=intr) KEYBOARD_NKRO_SIZE, 0, // wMaxPacketSize 1, // bInterval // --- Serial CDC --- // - 8 bytes - // interface association descriptor, USB ECN, Table 9-Z 8, // bLength 11, // bDescriptorType CDC_STATUS_INTERFACE, // bFirstInterface 2, // bInterfaceCount 0x02, // bFunctionClass 0x02, // bFunctionSubClass 0x01, // bFunctionProtocol 4, // iFunction // - 9 bytes - // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 9, // bLength 4, // bDescriptorType CDC_STATUS_INTERFACE, // bInterfaceNumber 0, // bAlternateSetting 1, // bNumEndpoints 0x02, // bInterfaceClass 0x02, // bInterfaceSubClass 0x01, // bInterfaceProtocol 0, // iInterface // - 5 bytes - // CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26 5, // bFunctionLength 0x24, // bDescriptorType 0x00, // bDescriptorSubtype 0x10, 0x01, // bcdCDC // - 5 bytes - // Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27 5, // bFunctionLength 0x24, // bDescriptorType 0x01, // bDescriptorSubtype 0x01, // bmCapabilities 1, // bDataInterface // - 4 bytes - // Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28 4, // bFunctionLength 0x24, // bDescriptorType 0x02, // bDescriptorSubtype 0x06, // bmCapabilities // - 5 bytes - // Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33 5, // bFunctionLength 0x24, // bDescriptorType 0x06, // bDescriptorSubtype CDC_STATUS_INTERFACE, // bMasterInterface CDC_DATA_INTERFACE, // bSlaveInterface0 // - 7 bytes - // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 7, // bLength 5, // bDescriptorType CDC_ACM_ENDPOINT | 0x80, // bEndpointAddress 0x03, // bmAttributes (0x03=intr) CDC_ACM_SIZE, 0, // wMaxPacketSize 64, // bInterval // - 9 bytes - // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 9, // bLength 4, // bDescriptorType CDC_DATA_INTERFACE, // bInterfaceNumber 0, // bAlternateSetting 2, // bNumEndpoints 0x0A, // bInterfaceClass 0x00, // bInterfaceSubClass 0x00, // bInterfaceProtocol 0, // iInterface // - 7 bytes - // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 7, // bLength 5, // bDescriptorType CDC_RX_ENDPOINT, // bEndpointAddress 0x02, // bmAttributes (0x02=bulk) CDC_RX_SIZE, 0, // wMaxPacketSize 0, // bInterval // - 7 bytes - // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 7, // bLength 5, // bDescriptorType CDC_TX_ENDPOINT | 0x80, // bEndpointAddress 0x02, // bmAttributes (0x02=bulk) CDC_TX_SIZE, 0, // wMaxPacketSize 0, // bInterval }; // Configuration Endpoint (0) Descriptor struct usb_string_descriptor_struct { uint8_t bLength; uint8_t bDescriptorType; int16_t wString[]; }; static const struct usb_string_descriptor_struct PROGMEM string0 = { 4, 3, {0x0409} }; static const struct usb_string_descriptor_struct PROGMEM string1 = { sizeof(STR_MANUFACTURER), 3, STR_MANUFACTURER }; static const struct usb_string_descriptor_struct PROGMEM string2 = { sizeof(STR_PRODUCT), 3, STR_PRODUCT }; static const struct usb_string_descriptor_struct PROGMEM string3 = { sizeof(STR_SERIAL), 3, STR_SERIAL }; // This table defines which descriptor data is sent for each specific // request from the host (in wValue and wIndex). static const struct descriptor_list_struct { uint16_t wValue; uint16_t wIndex; const uint8_t *addr; uint8_t length; } PROGMEM descriptor_list[] = { {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)}, {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)}, {0x0600, 0x0000, device_qualifier_descriptor, sizeof(device_qualifier_descriptor)}, {0x0A00, 0x0000, usb_debug_descriptor, sizeof(usb_debug_descriptor)}, {0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)}, {0x2100, KEYBOARD_INTERFACE, config1_descriptor + KEYBOARD_HID_DESC_OFFSET, 9}, {0x2200, KEYBOARD_NKRO_INTERFACE, keyboard_nkro_hid_report_desc, sizeof(keyboard_nkro_hid_report_desc)}, {0x2100, KEYBOARD_NKRO_INTERFACE, config1_descriptor + KEYBOARD_NKRO_HID_DESC_OFFSET, 9}, {0x0300, 0x0000, (const uint8_t *)&string0, 4}, {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)}, {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}, {0x0303, 0x0409, (const uint8_t *)&string3, sizeof(STR_SERIAL)} }; #define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct)) #endif // usb_keyboard_serial_h__