changeset 370:39e338a6733d

Fixing default ErgoDox layout and adding FlashMode button - Adds proper flashMode support for all keyboards and microcontrollers (usb and serial) - flashModeEnabled must be set to 1 otherwise it will only show an error * This is on purpose (somewhat dangerous feature as it allows remote flashing) - Capability cleanup
author Jacob Alexander <haata@kiibohd.com>
date Fri, 21 Aug 2015 19:43:45 -0700
parents ce9720634c15
children 23104e8e24f4
files Macro/PartialMap/macro.h Output/pjrcUSB/arm/usb_dev.c Output/pjrcUSB/capabilities.kll Output/pjrcUSB/output_com.c Output/pjrcUSB/output_com.h Output/uartOut/arm/uart_serial.c Output/uartOut/capabilities.kll Output/uartOut/output_com.c Output/usbMuxUart/output_com.c Scan/MDErgo1/leftHand.kll Scan/MDErgo1/rightHand.kll
diffstat 11 files changed, 148 insertions(+), 62 deletions(-) [+]
line wrap: on
line diff
--- a/Macro/PartialMap/macro.h	Fri Aug 21 18:26:46 2015 -0700
+++ b/Macro/PartialMap/macro.h	Fri Aug 21 19:43:45 2015 -0700
@@ -23,15 +23,6 @@
 
 
 
-// ----- Capabilities -----
-
-void Macro_layerState_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Macro_layerLatch_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Macro_layerLock_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Macro_layerShift_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-
-
-
 // ----- Functions -----
 
 void Macro_analogState( uint8_t scanCode, uint8_t state );
--- a/Output/pjrcUSB/arm/usb_dev.c	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/pjrcUSB/arm/usb_dev.c	Fri Aug 21 19:43:45 2015 -0700
@@ -34,6 +34,7 @@
 // Project Includes
 #include <Lib/OutputLib.h>
 #include <print.h>
+#include <kll_defs.h>
 
 // Local Includes
 #include "usb_dev.h"
@@ -872,6 +873,14 @@
 
 void usb_device_reload()
 {
+	if ( flashModeEnabled_define == 0 )
+	{
+		print( NL );
+		warn_print("flashModeEnabled not set, cancelling firmware reload...");
+		info_msg("Set flashModeEnabled to 1 in your kll configuration.");
+		return;
+	}
+
 // MCHCK
 #if defined(_mk20dx128vlf5_)
 
@@ -882,7 +891,7 @@
 	PORTA_PCR3 = PORT_PCR_PFE | PORT_PCR_MUX(1); // Internal pull-up
 
 	// Check for jumper
-	if ( GPIOA_PDIR & (1<<3) )
+	if ( GPIOA_PDIR & (1<<3) && flashModeEnabled_define != 0 )
 	{
 		print( NL );
 		warn_print("Security jumper not present, cancelling firmware reload...");
--- a/Output/pjrcUSB/capabilities.kll	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/pjrcUSB/capabilities.kll	Fri Aug 21 19:43:45 2015 -0700
@@ -1,10 +1,10 @@
 Name = pjrcUSBCapabilities;
-Version = 0.5;
+Version = 0.6;
 Author = "HaaTa (Jacob Alexander) 2014-2015";
-KLL = 0.3b;
+KLL = 0.3c;
 
 # Modified Date
-Date = 2015-07-12;
+Date = 2015-08-21;
 
 
 # Output capabilities
@@ -21,3 +21,12 @@
 keyboardLocale => KeyboardLocale_define;
 keyboardLocale = 0;
 
+# Bootloader Mode capability
+# XXX
+# By default this is disabled on purpose
+# It is a large security hazard
+flashModeEnabled => flashModeEnabled_define;
+flashModeEnabled = 0;
+
+flashMode => Output_flashMode_capability();
+
--- a/Output/pjrcUSB/output_com.c	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/pjrcUSB/output_com.c	Fri Aug 21 19:43:45 2015 -0700
@@ -484,6 +484,19 @@
 	}
 }
 
+void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+	// Display capability name
+	if ( stateType == 0xFF && state == 0xFF )
+	{
+		print("Output_flashMode(usbCode)");
+		return;
+	}
+
+	// Start flash mode
+	Output_firmwareReload();
+}
+
 
 
 // ----- Functions -----
--- a/Output/pjrcUSB/output_com.h	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/pjrcUSB/output_com.h	Fri Aug 21 19:43:45 2015 -0700
@@ -84,20 +84,6 @@
 
 
 
-// ----- Capabilities -----
-
-// Output capabilities
-void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-
-// Configuration capabilities
-void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args );
-
-
-
 // ----- Functions -----
 
 void Output_setup();
--- a/Output/uartOut/arm/uart_serial.c	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/uartOut/arm/uart_serial.c	Fri Aug 21 19:43:45 2015 -0700
@@ -27,6 +27,8 @@
 // Project Includes
 #include <Lib/OutputLib.h>
 #include <Lib/Interrupts.h>
+#include <print.h>
+#include <kll_defs.h>
 
 // Local Includes
 #include "uart_serial.h"
@@ -325,6 +327,48 @@
 
 void uart_device_reload()
 {
+	if ( flashModeEnabled_define == 0 )
+	{
+		print( NL );
+		warn_print("flashModeEnabled not set, cancelling firmware reload...");
+		info_msg("Set flashModeEnabled to 1 in your kll configuration.");
+		return;
+	}
+
+// MCHCK
+#if defined(_mk20dx128vlf5_)
+
+	// MCHCK Kiibohd Variant
+	// Check to see if PTA3 (has a pull-up) is connected to GND (usually via jumper)
+	// Only allow reload if the jumper is present (security)
+	GPIOA_PDDR &= ~(1<<3); // Input
+	PORTA_PCR3 = PORT_PCR_PFE | PORT_PCR_MUX(1); // Internal pull-up
+
+	// Check for jumper
+	if ( GPIOA_PDIR & (1<<3) && flashModeEnabled_define != 0 )
+	{
+		print( NL );
+		warn_print("Security jumper not present, cancelling firmware reload...");
+		info_msg("Replace jumper on middle 2 pins, or manually press the firmware reload button.");
+	}
+	else
+	{
+		// Copies variable into the VBAT register, must be identical to the variable in the bootloader to jump to the bootloader flash mode
+		for ( int pos = 0; pos < sizeof(sys_reset_to_loader_magic); pos++ )
+			(&VBAT)[ pos ] = sys_reset_to_loader_magic[ pos ];
+		SOFTWARE_RESET();
+	}
+
+// Kiibohd mk20dx256vlh7
+#elif defined(_mk20dx256vlh7_)
+	// Copies variable into the VBAT register, must be identical to the variable in the bootloader to jump to the bootloader flash mode
+	for ( int pos = 0; pos < sizeof(sys_reset_to_loader_magic); pos++ )
+		(&VBAT)[ pos ] = sys_reset_to_loader_magic[ pos ];
+	SOFTWARE_RESET();
+
+// Teensy 3.0 and 3.1
+#else
 	asm volatile("bkpt");
+#endif
 }
 
--- a/Output/uartOut/capabilities.kll	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/uartOut/capabilities.kll	Fri Aug 21 19:43:45 2015 -0700
@@ -1,12 +1,21 @@
 Name = uartOutCapabilities;
-Version = 0.1;
+Version = 0.2;
 Author = "HaaTa (Jacob Alexander) 2014";
 KLL = 0.3;
 
 # Modified Date
-Date = 2014-09-27;
+Date = 2014-08-21;
 
 
 # Capabilties available to the uartOut output module
 usbKeyOut   => Output_usbCodeSend_capability( usbCode : 1 );
 
+# Bootloader Mode capability
+# XXX
+# By default this is disabled on purpose
+# It is a large security hazard
+flashModeEnabled => flashModeEnabled_define;
+flashModeEnabled = 0;
+
+flashMode => Output_flashMode_capability();
+
--- a/Output/uartOut/output_com.c	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/uartOut/output_com.c	Fri Aug 21 19:43:45 2015 -0700
@@ -129,6 +129,19 @@
 	}
 }
 
+void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+	// Display capability name
+	if ( stateType == 0xFF && state == 0xFF )
+	{
+		print("Output_flashMode(usbCode)");
+		return;
+	}
+
+	// Start flash mode
+	Output_firmwareReload();
+}
+
 
 
 // ----- Functions -----
--- a/Output/usbMuxUart/output_com.c	Fri Aug 21 18:26:46 2015 -0700
+++ b/Output/usbMuxUart/output_com.c	Fri Aug 21 19:43:45 2015 -0700
@@ -490,6 +490,19 @@
 	}
 }
 
+void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+	// Display capability name
+	if ( stateType == 0xFF && state == 0xFF )
+	{
+		print("Output_flashMode(usbCode)");
+		return;
+	}
+
+	// Start flash mode
+	Output_firmwareReload();
+}
+
 
 
 // ----- Functions -----
--- a/Scan/MDErgo1/leftHand.kll	Fri Aug 21 18:26:46 2015 -0700
+++ b/Scan/MDErgo1/leftHand.kll	Fri Aug 21 19:43:45 2015 -0700
@@ -1,4 +1,4 @@
-Name = MDErgo1 Right Hand;
+Name = MDErgo1 Left Hand;
 Version = 0.1;
 Author = "HaaTa (Jacob Alexander) 2015";
 KLL = 0.3c;
@@ -8,22 +8,22 @@
 
 
 # Top Row
-S0x02 : U"6";
+S0x02 : U"Esc";
 S0x03 : U"5";
 S0x04 : U"4";
 S0x05 : U"3";
 S0x06 : U"2";
 S0x07 : U"1";
-S0x08 : U"Esc";
+S0x08 : U"Equals";
 
 # Top-Middle Row
-S0x0B : U"F4";
+S0x0B : U"Function1";
 S0x0C : U"T";
 S0x0D : U"R";
 S0x0E : U"E";
 S0x0F : U"W";
 S0x10 : U"Q";
-S0x11 : U"Tab";
+S0x11 : U"Backslash";
 
 # Middle Row
 S0x15 : U"G";
@@ -31,14 +31,14 @@
 S0x17 : U"D";
 S0x18 : U"S";
 S0x19 : U"A";
-S0x1A : U"Function1";
+S0x1A : U"Tab";
 
 # Top Thumb Cluster
-S0x1B : U"Home";
-S0x1C : U"End";
+S0x1B : U"LAlt";
+S0x1C : U"LCtrl";
 
 # Bottom-Middle Row
-S0x1D : U"F5";
+S0x1D : U"Function2";
 S0x1E : U"B";
 S0x1F : U"V";
 S0x20 : U"C";
@@ -47,15 +47,15 @@
 S0x23 : U"Left Shift";
 
 # Bottom Thumb Cluster
-S0x24 : U"Left Alt";
-S0x25 : U"Left Ctrl";
+S0x24 : U"Home";
+S0x25 : U"End";
 S0x26 : U"Delete";
-S0x27 : U"Space";
+S0x27 : U"Backspace";
 
 # Bottom Row
 S0x28 : U"Function5";
-S0x29 : U"Backtick";
-S0x2A : U"Right Brace";
-S0x2B : U"Left Brace";
-S0x2C : U"Function3";
+S0x29 : U"Function4";
+S0x2A : U"Function3";
+S0x2B : U"Backtick";
+S0x2C : U"LGui";
 
--- a/Scan/MDErgo1/rightHand.kll	Fri Aug 21 18:26:46 2015 -0700
+++ b/Scan/MDErgo1/rightHand.kll	Fri Aug 21 19:43:45 2015 -0700
@@ -8,22 +8,22 @@
 
 
 # Top Row
-S0x02 : U"7";
-S0x03 : U"8";
-S0x04 : U"9";
-S0x05 : U"0";
-S0x06 : U"Minus";
-S0x07 : U"Equal";
-S0x08 : U"Backspace";
+S0x02 : U"Function6";
+S0x03 : U"6";
+S0x04 : U"7";
+S0x05 : U"8";
+S0x06 : U"9";
+S0x07 : U"0";
+S0x08 : U"Minus";
 
 # Top-Middle Row
-S0x0B : U"PageUp";
+S0x0B : U"Left Brace";
 S0x0C : U"Y";
 S0x0D : U"U";
 S0x0E : U"I";
 S0x0F : U"O";
 S0x10 : U"P";
-S0x11 : U"BackSlash";
+S0x11 : U"Right Brace";
 
 # Middle Row
 S0x15 : U"H";
@@ -34,11 +34,11 @@
 S0x1A : U"Quote";
 
 # Top Thumb Cluster
-S0x1B : U"PrintScreen";
-S0x1C : U"Insert";
+S0x1B : U"RAlt";
+S0x1C : U"RCtrl";
 
 # Bottom-Middle Row
-S0x1D : U"PageDown";
+S0x1D : U"Function7";
 S0x1E : U"N";
 S0x1F : U"M";
 S0x20 : U"Comma";
@@ -47,16 +47,15 @@
 S0x23 : U"Right Shift";
 
 # Bottom Thumb Cluster
-S0x24 : U"Right Alt";
-S0x25 : U"Right Ctrl";
+S0x24 : U"PageUp";
+S0x25 : U"PageDown";
 S0x26 : U"Enter";
-S0x27 : U"Function2";
+S0x27 : U"Space";
 
 # Bottom Row
 S0x28 : U"Left";
 S0x29 : U"Down";
 S0x2A : U"Up";
 S0x2B : U"Right";
-S0x2C : U"Function4";
+S0x2C : U"RGui";
 
-