Mercurial > louis > kiibohd-controller
changeset 0:43dfb6e4e697
Initial Commit
| author | Jacob Alexander <triplehaata@gmail.com> |
|---|---|
| date | Thu, 03 Mar 2011 16:38:32 -0800 |
| parents | |
| children | 0f88e9aad77a |
| files | Makefile build main.c usb_keyboard.c usb_keyboard.h |
| diffstat | 5 files changed, 1489 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Makefile Thu Mar 03 16:38:32 2011 -0800 @@ -0,0 +1,614 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# Target file name (without extension). +TARGET = main + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + usb_keyboard.c + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +# +#MCU = at90usb162 # Teensy 1.0 +#MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) + + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = stk500v2 + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = com1 # programmer connected to serial device + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf +ELFSIZE = $(SIZE) $(TARGET).elf + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean clean_list program debug gdb-config
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/build Thu Mar 03 16:38:32 2011 -0800 @@ -0,0 +1,25 @@ +#!/bin/bash +#| Cleaner builder script, than plain usage of the Makefile + +dir="Build" + +#| If directory doesn't exist +if [ ! -d $dir ]; then + mkdir -p $dir + for file in {Makefile,*.c,*.h}; do + ln -s "`pwd`/$file" $dir/. + done +fi + +cd $dir +make "$@" +cd $OLDPWD + +#| On make clean, make it really clean +if [ "${1}" = "clean" ]; then + rm -r $dir + echo "Cleaned" +fi + +exit 0 +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.c Thu Mar 03 16:38:32 2011 -0800 @@ -0,0 +1,52 @@ +/* Copyright (C) 2011 by Jacob Alexander + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "usb_keyboard.h" + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) + +int main() +{ + // set for 16 MHz clock + CPU_PRESCALE( 0 ); + + // Configuring Pins + // TODO + + // Initialize the USB, and then wait for the host to set configuration. + // If the Teensy is powered without a PC connected to the USB port, + // this will wait forever. + usb_init(); + while ( !usb_configured() ) /* wait */ ; + + // Wait an extra second for the PC's operating system to load drivers + // and do whatever it does to actually be ready for input + _delay_ms(1000); + + // Main Detection Loop + // TODO + // usb_keyboard_press(KEY_B, KEY_SHIFT); +} +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/usb_keyboard.c Thu Mar 03 16:38:32 2011 -0800 @@ -0,0 +1,592 @@ +/* USB Keyboard Example for Teensy USB Development Board + * http://www.pjrc.com/teensy/usb_keyboard.html + * Copyright (c) 2009 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +// Version 1.0: Initial Release +// Version 1.1: Add support for Teensy 2.0 + +#define USB_SERIAL_PRIVATE_INCLUDE +#include "usb_keyboard.h" + +/************************************************************************** + * + * Configurable Options + * + **************************************************************************/ + +// You can change these to give your code its own name. +#define STR_MANUFACTURER L"MfgName" +#define STR_PRODUCT L"Keyboard" + + +// Mac OS-X and Linux automatically load the correct drivers. On +// Windows, even though the driver is supplied by Microsoft, an +// INF file is needed to load the driver. These numbers need to +// match the INF file. +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x047C + + +// USB devices are supposed to implment a halt feature, which is +// rarely (if ever) used. If you comment this line out, the halt +// code will be removed, saving 102 bytes of space (gcc 4.3.0). +// This is not strictly USB compliant, but works with all major +// operating systems. +#define SUPPORT_ENDPOINT_HALT + + + +/************************************************************************** + * + * Endpoint Buffer Configuration + * + **************************************************************************/ + +#define ENDPOINT0_SIZE 32 + +#define KEYBOARD_INTERFACE 0 +#define KEYBOARD_ENDPOINT 3 +#define KEYBOARD_SIZE 8 +#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER + +static const uint8_t PROGMEM endpoint_config_table[] = { + 0, + 0, + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER, + 0 +}; + + +/************************************************************************** + * + * Descriptor Data + * + **************************************************************************/ + +// Descriptors are the data that your computer reads when it auto-detects +// this USB device (called "enumeration" in USB lingo). The most commonly +// changed items are editable at the top of this file. Changing things +// in here should only be done by those who've read chapter 9 of the USB +// spec and relevant portions of any USB class specifications! + + +static uint8_t PROGMEM device_descriptor[] = { + 18, // bLength + 1, // bDescriptorType + 0x00, 0x02, // bcdUSB + 0, // bDeviceClass + 0, // bDeviceSubClass + 0, // bDeviceProtocol + ENDPOINT0_SIZE, // bMaxPacketSize0 + LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor + LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct + 0x00, 0x01, // bcdDevice + 1, // iManufacturer + 2, // iProduct + 0, // iSerialNumber + 1 // bNumConfigurations +}; + +// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60 +static uint8_t PROGMEM keyboard_hid_report_desc[] = { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + 0x95, 0x01, // Report Count (1), + 0x75, 0x08, // Report Size (8), + 0x81, 0x03, // Input (Constant), ;Reserved byte + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), ;LED report padding + 0x95, 0x06, // Report Count (6), + 0x75, 0x08, // Report Size (8), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x68, // Logical Maximum(104), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, 0x68, // Usage Maximum (104), + 0x81, 0x00, // Input (Data, Array), + 0xc0 // End Collection +}; + +#define CONFIG1_DESC_SIZE (9+9+9+7) +#define KEYBOARD_HID_DESC_OFFSET (9+9) +static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = { + // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10 + 9, // bLength; + 2, // bDescriptorType; + LSB(CONFIG1_DESC_SIZE), // wTotalLength + MSB(CONFIG1_DESC_SIZE), + 1, // bNumInterfaces + 1, // bConfigurationValue + 0, // iConfiguration + 0xC0, // bmAttributes + 50, // bMaxPower + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + KEYBOARD_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + 0x01, // bInterfaceSubClass (0x01 = Boot) + 0x01, // bInterfaceProtocol (0x01 = Keyboard) + 0, // iInterface + // HID interface descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(keyboard_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + KEYBOARD_SIZE, 0, // wMaxPacketSize + 1 // bInterval +}; + +// If you're desperate for a little extra code memory, these strings +// can be completely removed if iManufacturer, iProduct, iSerialNumber +// in the device desciptor are changed to zeros. +struct usb_string_descriptor_struct { + uint8_t bLength; + uint8_t bDescriptorType; + int16_t wString[]; +}; +static struct usb_string_descriptor_struct PROGMEM string0 = { + 4, + 3, + {0x0409} +}; +static struct usb_string_descriptor_struct PROGMEM string1 = { + sizeof(STR_MANUFACTURER), + 3, + STR_MANUFACTURER +}; +static struct usb_string_descriptor_struct PROGMEM string2 = { + sizeof(STR_PRODUCT), + 3, + STR_PRODUCT +}; + +// This table defines which descriptor data is sent for each specific +// request from the host (in wValue and wIndex). +static struct descriptor_list_struct { + uint16_t wValue; + uint16_t wIndex; + const uint8_t *addr; + uint8_t length; +} PROGMEM descriptor_list[] = { + {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)}, + {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)}, + {0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)}, + {0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9}, + {0x0300, 0x0000, (const uint8_t *)&string0, 4}, + {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)}, + {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)} +}; +#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct)) + + +/************************************************************************** + * + * Variables - these are the only non-stack RAM usage + * + **************************************************************************/ + +// zero when we are not configured, non-zero when enumerated +static volatile uint8_t usb_configuration=0; + +// which modifier keys are currently pressed +// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui +// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui +uint8_t keyboard_modifier_keys=0; + +// which keys are currently pressed, up to 6 keys may be down at once +uint8_t keyboard_keys[6]={0,0,0,0,0,0}; + +// protocol setting from the host. We use exactly the same report +// either way, so this variable only stores the setting since we +// are required to be able to report which setting is in use. +static uint8_t keyboard_protocol=1; + +// the idle configuration, how often we send the report to the +// host (ms * 4) even when it hasn't changed +static uint8_t keyboard_idle_config=125; + +// count until idle timeout +static uint8_t keyboard_idle_count=0; + +// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana +volatile uint8_t keyboard_leds=0; + + +/************************************************************************** + * + * Public Functions - these are the API intended for the user + * + **************************************************************************/ + + +// initialize USB +void usb_init(void) +{ + HW_CONFIG(); + USB_FREEZE(); // enable USB + PLL_CONFIG(); // config PLL + while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock + USB_CONFIG(); // start USB clock + UDCON = 0; // enable attach resistor + usb_configuration = 0; + UDIEN = (1<<EORSTE)|(1<<SOFE); + sei(); +} + +// return 0 if the USB is not configured, or the configuration +// number selected by the HOST +uint8_t usb_configured(void) +{ + return usb_configuration; +} + + +// perform a single keystroke +int8_t usb_keyboard_press(uint8_t key, uint8_t modifier) +{ + int8_t r; + + keyboard_modifier_keys = modifier; + keyboard_keys[0] = key; + r = usb_keyboard_send(); + if (r) return r; + keyboard_modifier_keys = 0; + keyboard_keys[0] = 0; + return usb_keyboard_send(); +} + +// send the contents of keyboard_keys and keyboard_modifier_keys +int8_t usb_keyboard_send(void) +{ + uint8_t i, intr_state, timeout; + + if (!usb_configuration) return -1; + intr_state = SREG; + cli(); + UENUM = KEYBOARD_ENDPOINT; + timeout = UDFNUML + 50; + while (1) { + // are we ready to transmit? + if (UEINTX & (1<<RWAL)) break; + SREG = intr_state; + // has the USB gone offline? + if (!usb_configuration) return -1; + // have we waited too long? + if (UDFNUML == timeout) return -1; + // get ready to try checking again + intr_state = SREG; + cli(); + UENUM = KEYBOARD_ENDPOINT; + } + UEDATX = keyboard_modifier_keys; + UEDATX = 0; + for (i=0; i<6; i++) { + UEDATX = keyboard_keys[i]; + } + UEINTX = 0x3A; + keyboard_idle_count = 0; + SREG = intr_state; + return 0; +} + +/************************************************************************** + * + * Private Functions - not intended for general user consumption.... + * + **************************************************************************/ + + + +// USB Device Interrupt - handle all device-level events +// the transmit buffer flushing is triggered by the start of frame +// +ISR(USB_GEN_vect) +{ + uint8_t intbits, t, i; + static uint8_t div4=0; + + intbits = UDINT; + UDINT = 0; + if (intbits & (1<<EORSTI)) { + UENUM = 0; + UECONX = 1; + UECFG0X = EP_TYPE_CONTROL; + UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER; + UEIENX = (1<<RXSTPE); + usb_configuration = 0; + } + if ((intbits & (1<<SOFI)) && usb_configuration) { + if (keyboard_idle_config && (++div4 & 3) == 0) { + UENUM = KEYBOARD_ENDPOINT; + if (UEINTX & (1<<RWAL)) { + keyboard_idle_count++; + if (keyboard_idle_count == keyboard_idle_config) { + keyboard_idle_count = 0; + UEDATX = keyboard_modifier_keys; + UEDATX = 0; + for (i=0; i<6; i++) { + UEDATX = keyboard_keys[i]; + } + UEINTX = 0x3A; + } + } + } + } +} + + + +// Misc functions to wait for ready and send/receive packets +static inline void usb_wait_in_ready(void) +{ + while (!(UEINTX & (1<<TXINI))) ; +} +static inline void usb_send_in(void) +{ + UEINTX = ~(1<<TXINI); +} +static inline void usb_wait_receive_out(void) +{ + while (!(UEINTX & (1<<RXOUTI))) ; +} +static inline void usb_ack_out(void) +{ + UEINTX = ~(1<<RXOUTI); +} + + + +// USB Endpoint Interrupt - endpoint 0 is handled here. The +// other endpoints are manipulated by the user-callable +// functions, and the start-of-frame interrupt. +// +ISR(USB_COM_vect) +{ + uint8_t intbits; + const uint8_t *list; + const uint8_t *cfg; + uint8_t i, n, len, en; + uint8_t bmRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; + uint16_t desc_val; + const uint8_t *desc_addr; + uint8_t desc_length; + + UENUM = 0; + intbits = UEINTX; + if (intbits & (1<<RXSTPI)) { + bmRequestType = UEDATX; + bRequest = UEDATX; + wValue = UEDATX; + wValue |= (UEDATX << 8); + wIndex = UEDATX; + wIndex |= (UEDATX << 8); + wLength = UEDATX; + wLength |= (UEDATX << 8); + UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI)); + if (bRequest == GET_DESCRIPTOR) { + list = (const uint8_t *)descriptor_list; + for (i=0; ; i++) { + if (i >= NUM_DESC_LIST) { + UECONX = (1<<STALLRQ)|(1<<EPEN); //stall + return; + } + desc_val = pgm_read_word(list); + if (desc_val != wValue) { + list += sizeof(struct descriptor_list_struct); + continue; + } + list += 2; + desc_val = pgm_read_word(list); + if (desc_val != wIndex) { + list += sizeof(struct descriptor_list_struct)-2; + continue; + } + list += 2; + desc_addr = (const uint8_t *)pgm_read_word(list); + list += 2; + desc_length = pgm_read_byte(list); + break; + } + len = (wLength < 256) ? wLength : 255; + if (len > desc_length) len = desc_length; + do { + // wait for host ready for IN packet + do { + i = UEINTX; + } while (!(i & ((1<<TXINI)|(1<<RXOUTI)))); + if (i & (1<<RXOUTI)) return; // abort + // send IN packet + n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE; + for (i = n; i; i--) { + UEDATX = pgm_read_byte(desc_addr++); + } + len -= n; + usb_send_in(); + } while (len || n == ENDPOINT0_SIZE); + return; + } + if (bRequest == SET_ADDRESS) { + usb_send_in(); + usb_wait_in_ready(); + UDADDR = wValue | (1<<ADDEN); + return; + } + if (bRequest == SET_CONFIGURATION && bmRequestType == 0) { + usb_configuration = wValue; + usb_send_in(); + cfg = endpoint_config_table; + for (i=1; i<5; i++) { + UENUM = i; + en = pgm_read_byte(cfg++); + UECONX = en; + if (en) { + UECFG0X = pgm_read_byte(cfg++); + UECFG1X = pgm_read_byte(cfg++); + } + } + UERST = 0x1E; + UERST = 0; + return; + } + if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) { + usb_wait_in_ready(); + UEDATX = usb_configuration; + usb_send_in(); + return; + } + + if (bRequest == GET_STATUS) { + usb_wait_in_ready(); + i = 0; + #ifdef SUPPORT_ENDPOINT_HALT + if (bmRequestType == 0x82) { + UENUM = wIndex; + if (UECONX & (1<<STALLRQ)) i = 1; + UENUM = 0; + } + #endif + UEDATX = i; + UEDATX = 0; + usb_send_in(); + return; + } + #ifdef SUPPORT_ENDPOINT_HALT + if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE) + && bmRequestType == 0x02 && wValue == 0) { + i = wIndex & 0x7F; + if (i >= 1 && i <= MAX_ENDPOINT) { + usb_send_in(); + UENUM = i; + if (bRequest == SET_FEATURE) { + UECONX = (1<<STALLRQ)|(1<<EPEN); + } else { + UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN); + UERST = (1 << i); + UERST = 0; + } + return; + } + } + #endif + if (wIndex == KEYBOARD_INTERFACE) { + if (bmRequestType == 0xA1) { + if (bRequest == HID_GET_REPORT) { + usb_wait_in_ready(); + UEDATX = keyboard_modifier_keys; + UEDATX = 0; + for (i=0; i<6; i++) { + UEDATX = keyboard_keys[i]; + } + usb_send_in(); + return; + } + if (bRequest == HID_GET_IDLE) { + usb_wait_in_ready(); + UEDATX = keyboard_idle_config; + usb_send_in(); + return; + } + if (bRequest == HID_GET_PROTOCOL) { + usb_wait_in_ready(); + UEDATX = keyboard_protocol; + usb_send_in(); + return; + } + } + if (bmRequestType == 0x21) { + if (bRequest == HID_SET_REPORT) { + usb_wait_receive_out(); + keyboard_leds = UEDATX; + usb_ack_out(); + usb_send_in(); + return; + } + if (bRequest == HID_SET_IDLE) { + keyboard_idle_config = (wValue >> 8); + keyboard_idle_count = 0; + usb_send_in(); + return; + } + if (bRequest == HID_SET_PROTOCOL) { + keyboard_protocol = wValue; + usb_send_in(); + return; + } + } + } + } + UECONX = (1<<STALLRQ) | (1<<EPEN); // stall +} + +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/usb_keyboard.h Thu Mar 03 16:38:32 2011 -0800 @@ -0,0 +1,206 @@ +#ifndef usb_serial_h__ +#define usb_serial_h__ + +#include <stdint.h> + +void usb_init(void); // initialize everything +uint8_t usb_configured(void); // is the USB port configured + +int8_t usb_keyboard_press(uint8_t key, uint8_t modifier); +int8_t usb_keyboard_send(void); +extern uint8_t keyboard_modifier_keys; +extern uint8_t keyboard_keys[6]; +extern volatile uint8_t keyboard_leds; + +// This file does not include the HID debug functions, so these empty +// macros replace them with nothing, so users can compile code that +// has calls to these functions. +#define usb_debug_putchar(c) +#define usb_debug_flush_output() + + +#define KEY_CTRL 0x01 +#define KEY_SHIFT 0x02 +#define KEY_ALT 0x04 +#define KEY_GUI 0x08 +#define KEY_LEFT_CTRL 0x01 +#define KEY_LEFT_SHIFT 0x02 +#define KEY_LEFT_ALT 0x04 +#define KEY_LEFT_GUI 0x08 +#define KEY_RIGHT_CTRL 0x10 +#define KEY_RIGHT_SHIFT 0x20 +#define KEY_RIGHT_ALT 0x40 +#define KEY_RIGHT_GUI 0x80 + +#define KEY_A 4 +#define KEY_B 5 +#define KEY_C 6 +#define KEY_D 7 +#define KEY_E 8 +#define KEY_F 9 +#define KEY_G 10 +#define KEY_H 11 +#define KEY_I 12 +#define KEY_J 13 +#define KEY_K 14 +#define KEY_L 15 +#define KEY_M 16 +#define KEY_N 17 +#define KEY_O 18 +#define KEY_P 19 +#define KEY_Q 20 +#define KEY_R 21 +#define KEY_S 22 +#define KEY_T 23 +#define KEY_U 24 +#define KEY_V 25 +#define KEY_W 26 +#define KEY_X 27 +#define KEY_Y 28 +#define KEY_Z 29 +#define KEY_1 30 +#define KEY_2 31 +#define KEY_3 32 +#define KEY_4 33 +#define KEY_5 34 +#define KEY_6 35 +#define KEY_7 36 +#define KEY_8 37 +#define KEY_9 38 +#define KEY_0 39 +#define KEY_ENTER 40 +#define KEY_ESC 41 +#define KEY_BACKSPACE 42 +#define KEY_TAB 43 +#define KEY_SPACE 44 +#define KEY_MINUS 45 +#define KEY_EQUAL 46 +#define KEY_LEFT_BRACE 47 +#define KEY_RIGHT_BRACE 48 +#define KEY_BACKSLASH 49 +#define KEY_NUMBER 50 +#define KEY_SEMICOLON 51 +#define KEY_QUOTE 52 +#define KEY_TILDE 53 +#define KEY_COMMA 54 +#define KEY_PERIOD 55 +#define KEY_SLASH 56 +#define KEY_CAPS_LOCK 57 +#define KEY_F1 58 +#define KEY_F2 59 +#define KEY_F3 60 +#define KEY_F4 61 +#define KEY_F5 62 +#define KEY_F6 63 +#define KEY_F7 64 +#define KEY_F8 65 +#define KEY_F9 66 +#define KEY_F10 67 +#define KEY_F11 68 +#define KEY_F12 69 +#define KEY_PRINTSCREEN 70 +#define KEY_SCROLL_LOCK 71 +#define KEY_PAUSE 72 +#define KEY_INSERT 73 +#define KEY_HOME 74 +#define KEY_PAGE_UP 75 +#define KEY_DELETE 76 +#define KEY_END 77 +#define KEY_PAGE_DOWN 78 +#define KEY_RIGHT 79 +#define KEY_LEFT 80 +#define KEY_DOWN 81 +#define KEY_UP 82 +#define KEY_NUM_LOCK 83 +#define KEYPAD_SLASH 84 +#define KEYPAD_ASTERIX 85 +#define KEYPAD_MINUS 86 +#define KEYPAD_PLUS 87 +#define KEYPAD_ENTER 88 +#define KEYPAD_1 89 +#define KEYPAD_2 90 +#define KEYPAD_3 91 +#define KEYPAD_4 92 +#define KEYPAD_5 93 +#define KEYPAD_6 94 +#define KEYPAD_7 95 +#define KEYPAD_8 96 +#define KEYPAD_9 97 +#define KEYPAD_0 98 +#define KEYPAD_PERIOD 99 + + + + +// Everything below this point is only intended for usb_serial.c +#ifdef USB_SERIAL_PRIVATE_INCLUDE +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/interrupt.h> + +#define EP_TYPE_CONTROL 0x00 +#define EP_TYPE_BULK_IN 0x81 +#define EP_TYPE_BULK_OUT 0x80 +#define EP_TYPE_INTERRUPT_IN 0xC1 +#define EP_TYPE_INTERRUPT_OUT 0xC0 +#define EP_TYPE_ISOCHRONOUS_IN 0x41 +#define EP_TYPE_ISOCHRONOUS_OUT 0x40 + +#define EP_SINGLE_BUFFER 0x02 +#define EP_DOUBLE_BUFFER 0x06 + +#define EP_SIZE(s) ((s) == 64 ? 0x30 : \ + ((s) == 32 ? 0x20 : \ + ((s) == 16 ? 0x10 : \ + 0x00))) + +#define MAX_ENDPOINT 4 + +#define LSB(n) (n & 255) +#define MSB(n) ((n >> 8) & 255) + +#if defined(__AVR_AT90USB162__) +#define HW_CONFIG() +#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0))) +#define USB_CONFIG() (USBCON = (1<<USBE)) +#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) +#elif defined(__AVR_ATmega32U4__) +#define HW_CONFIG() (UHWCON = 0x01) +#define PLL_CONFIG() (PLLCSR = 0x12) +#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) +#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) +#elif defined(__AVR_AT90USB646__) +#define HW_CONFIG() (UHWCON = 0x81) +#define PLL_CONFIG() (PLLCSR = 0x1A) +#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) +#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) +#elif defined(__AVR_AT90USB1286__) +#define HW_CONFIG() (UHWCON = 0x81) +#define PLL_CONFIG() (PLLCSR = 0x16) +#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) +#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) +#endif + +// standard control endpoint request types +#define GET_STATUS 0 +#define CLEAR_FEATURE 1 +#define SET_FEATURE 3 +#define SET_ADDRESS 5 +#define GET_DESCRIPTOR 6 +#define GET_CONFIGURATION 8 +#define SET_CONFIGURATION 9 +#define GET_INTERFACE 10 +#define SET_INTERFACE 11 +// HID (human interface device) +#define HID_GET_REPORT 1 +#define HID_GET_IDLE 2 +#define HID_GET_PROTOCOL 3 +#define HID_SET_REPORT 9 +#define HID_SET_IDLE 10 +#define HID_SET_PROTOCOL 11 +// CDC (communication class device) +#define CDC_SET_LINE_CODING 0x20 +#define CDC_GET_LINE_CODING 0x21 +#define CDC_SET_CONTROL_LINE_STATE 0x22 +#endif +#endif