Mercurial > louis > kiibohd-controller
annotate Output/usbMuxUart/output_com.c @ 420:23a1868b4ac2
Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
author | Jacob Alexander <haata@kiibohd.com> |
---|---|
date | Sun, 21 Feb 2016 19:56:52 -0800 |
parents | d8f61e15aca1 |
children | f10c2dad7f55 |
rev | line source |
---|---|
420
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
1 /* Copyright (C) 2014-2016 by Jacob Alexander |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
2 * |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
3 * Permission is hereby granted, free of charge, to any person obtaining a copy |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
4 * of this software and associated documentation files (the "Software"), to deal |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
5 * in the Software without restriction, including without limitation the rights |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
6 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
7 * copies of the Software, and to permit persons to whom the Software is |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
8 * furnished to do so, subject to the following conditions: |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
9 * |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
10 * The above copyright notice and this permission notice shall be included in |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
11 * all copies or substantial portions of the Software. |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
12 * |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
13 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
14 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
15 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
16 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
17 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
18 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
19 * THE SOFTWARE. |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
20 */ |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
21 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
22 // ----- Includes ----- |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
23 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
24 // Compiler Includes |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
25 #include <Lib/OutputLib.h> |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
26 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
27 // Project Includes |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
28 #include <cli.h> |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
29 #include <led.h> |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
30 #include <print.h> |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
31 #include <scan_loop.h> |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
32 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
33 // USB Includes |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
34 #if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) |
263
9afed592bcb5
Preparing for mk20dx256vlh7
Jacob Alexander <haata@kiibohd.com>
parents:
239
diff
changeset
|
35 #elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) |
300
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
36 #include <arm/uart_serial.h> |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
37 #include <arm/usb_dev.h> |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
38 #include <arm/usb_keyboard.h> |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
39 #include <arm/usb_serial.h> |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
40 #endif |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
41 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
42 // Local Includes |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
43 #include "output_com.h" |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
44 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
45 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
46 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
47 // ----- Macros ----- |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
48 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
49 // Used to build a bitmap lookup table from a byte addressable array |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
50 #define byteLookup( byte ) case (( byte ) * ( 8 )): bytePosition = byte; byteShift = 0; break; \ |
310 | 51 case (( byte ) * ( 8 ) + ( 1 )): bytePosition = byte; byteShift = 1; break; \ |
52 case (( byte ) * ( 8 ) + ( 2 )): bytePosition = byte; byteShift = 2; break; \ | |
53 case (( byte ) * ( 8 ) + ( 3 )): bytePosition = byte; byteShift = 3; break; \ | |
54 case (( byte ) * ( 8 ) + ( 4 )): bytePosition = byte; byteShift = 4; break; \ | |
55 case (( byte ) * ( 8 ) + ( 5 )): bytePosition = byte; byteShift = 5; break; \ | |
56 case (( byte ) * ( 8 ) + ( 6 )): bytePosition = byte; byteShift = 6; break; \ | |
57 case (( byte ) * ( 8 ) + ( 7 )): bytePosition = byte; byteShift = 7; break | |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
58 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
59 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
60 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
61 // ----- Function Declarations ----- |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
62 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
63 void cliFunc_kbdProtocol( char* args ); |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
64 void cliFunc_outputDebug( char* args ); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
65 void cliFunc_readLEDs ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
66 void cliFunc_readUART ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
67 void cliFunc_sendKeys ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
68 void cliFunc_sendUART ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
69 void cliFunc_setKeys ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
70 void cliFunc_setMod ( char* args ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
71 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
72 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
73 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
74 // ----- Variables ----- |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
75 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
76 // Output Module command dictionary |
239
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
77 CLIDict_Entry( kbdProtocol, "Keyboard Protocol Mode: 0 - Boot, 1 - OS/NKRO Mode" ); |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
78 CLIDict_Entry( outputDebug, "Toggle Output Debug mode." ); |
239
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
79 CLIDict_Entry( readLEDs, "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc." ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
80 CLIDict_Entry( readUART, "Read UART buffer until empty." ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
81 CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier byte." ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
82 CLIDict_Entry( sendUART, "Send characters over UART0." ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
83 CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
84 CLIDict_Entry( setMod, "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI" ); |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
85 |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
86 CLIDict_Def( outputCLIDict, "USB Module Commands" ) = { |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
87 CLIDict_Item( kbdProtocol ), |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
88 CLIDict_Item( outputDebug ), |
239
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
89 CLIDict_Item( readLEDs ), |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
90 CLIDict_Item( readUART ), |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
91 CLIDict_Item( sendKeys ), |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
92 CLIDict_Item( sendUART ), |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
93 CLIDict_Item( setKeys ), |
2a4c99da1276
HUGE AVR RAM optimization (~28%).
Jacob Alexander <haata@kiibohd.com>
parents:
230
diff
changeset
|
94 CLIDict_Item( setMod ), |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
95 { 0, 0, 0 } // Null entry for dictionary end |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
96 }; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
97 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
98 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
99 // Which modifier keys are currently pressed |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
100 // 1=left ctrl, 2=left shift, 4=left alt, 8=left gui |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
101 // 16=right ctrl, 32=right shift, 64=right alt, 128=right gui |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
102 uint8_t USBKeys_Modifiers = 0; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
103 uint8_t USBKeys_ModifiersCLI = 0; // Separate CLI send buffer |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
104 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
105 // Currently pressed keys, max is defined by USB_MAX_KEY_SEND |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
106 uint8_t USBKeys_Keys [USB_NKRO_BITFIELD_SIZE_KEYS]; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
107 uint8_t USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
108 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
109 // System Control and Consumer Control 1KRO containers |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
110 uint8_t USBKeys_SysCtrl; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
111 uint16_t USBKeys_ConsCtrl; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
112 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
113 // The number of keys sent to the usb in the array |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
114 uint8_t USBKeys_Sent = 0; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
115 uint8_t USBKeys_SentCLI = 0; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
116 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
117 // 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
118 volatile uint8_t USBKeys_LEDs = 0; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
119 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
120 // Protocol setting from the host. |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
121 // 0 - Boot Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
122 // 1 - NKRO Mode (Default, unless set by a BIOS or boot interface) |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
123 volatile uint8_t USBKeys_Protocol = 1; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
124 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
125 // Indicate if USB should send update |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
126 // OS only needs update if there has been a change in state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
127 USBKeyChangeState USBKeys_Changed = USBKeyChangeState_None; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
128 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
129 // the idle configuration, how often we send the report to the |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
130 // host (ms * 4) even when it hasn't changed |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
131 uint8_t USBKeys_Idle_Config = 125; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
132 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
133 // count until idle timeout |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
134 uint8_t USBKeys_Idle_Count = 0; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
135 |
275
d5bf41d7f7ef
Initial code for USB cable detection
Jacob Alexander <haata@kiibohd.com>
parents:
263
diff
changeset
|
136 // Indicates whether the Output module is fully functional |
d5bf41d7f7ef
Initial code for USB cable detection
Jacob Alexander <haata@kiibohd.com>
parents:
263
diff
changeset
|
137 // 0 - Not fully functional, 1 - Fully functional |
d5bf41d7f7ef
Initial code for USB cable detection
Jacob Alexander <haata@kiibohd.com>
parents:
263
diff
changeset
|
138 // 0 is often used to show that a USB cable is not plugged in (but has power) |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
139 volatile uint8_t Output_Available = 0; |
275
d5bf41d7f7ef
Initial code for USB cable detection
Jacob Alexander <haata@kiibohd.com>
parents:
263
diff
changeset
|
140 |
300
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
141 // Debug control variable for Output modules |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
142 // 0 - Debug disabled (default) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
143 // 1 - Debug enabled |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
144 uint8_t Output_DebugMode = 0; |
300
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
145 |
420
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
146 // mA - Set by outside module if not using USB (i.e. Interconnect) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
147 // Generally set to 100 mA (low power) or 500 mA (high power) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
148 uint16_t Output_ExtCurrent_Available = 0; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
149 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
150 // mA - Set by USB module (if exists) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
151 // Initially 100 mA, but may be negotiated higher (e.g. 500 mA) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
152 uint16_t Output_USBCurrent_Available = 0; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
153 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
154 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
155 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
156 // ----- Capabilities ----- |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
157 |
300
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
158 // Set Boot Keyboard Protocol |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
159 void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
160 { |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
161 // Display capability name |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
162 if ( stateType == 0xFF && state == 0xFF ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
163 { |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
164 print("Output_kbdProtocolBoot()"); |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
165 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
166 } |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
167 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
168 // Only set if necessary |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
169 if ( USBKeys_Protocol == 0 ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
170 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
171 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
172 // TODO Analog inputs |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
173 // Only set on key press |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
174 if ( stateType != 0x01 ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
175 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
176 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
177 // Flush the key buffers |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
178 Output_flushBuffers(); |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
179 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
180 // Set the keyboard protocol to Boot Mode |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
181 USBKeys_Protocol = 0; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
182 } |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
183 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
184 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
185 // Set NKRO Keyboard Protocol |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
186 void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
187 { |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
188 // Display capability name |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
189 if ( stateType == 0xFF && state == 0xFF ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
190 { |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
191 print("Output_kbdProtocolNKRO()"); |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
192 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
193 } |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
194 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
195 // Only set if necessary |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
196 if ( USBKeys_Protocol == 1 ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
197 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
198 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
199 // TODO Analog inputs |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
200 // Only set on key press |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
201 if ( stateType != 0x01 ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
202 return; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
203 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
204 // Flush the key buffers |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
205 Output_flushBuffers(); |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
206 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
207 // Set the keyboard protocol to NKRO Mode |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
208 USBKeys_Protocol = 1; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
209 } |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
210 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
211 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
212 // Sends a Consumer Control code to the USB Output buffer |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
213 void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
214 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
215 // Display capability name |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
216 if ( stateType == 0xFF && state == 0xFF ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
217 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
218 print("Output_consCtrlSend(consCode)"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
219 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
220 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
221 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
222 // Not implemented in Boot Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
223 if ( USBKeys_Protocol == 0 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
224 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
225 warn_print("Consumer Control is not implemented for Boot Mode"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
226 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
227 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
228 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
229 // TODO Analog inputs |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
230 // Only indicate USB has changed if either a press or release has occured |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
231 if ( state == 0x01 || state == 0x03 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
232 USBKeys_Changed |= USBKeyChangeState_Consumer; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
233 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
234 // Only send keypresses if press or hold state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
235 if ( stateType == 0x00 && state == 0x03 ) // Release state |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
236 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
237 USBKeys_ConsCtrl = 0; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
238 return; |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
239 } |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
240 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
241 // Set consumer control code |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
242 USBKeys_ConsCtrl = *(uint16_t*)(&args[0]); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
243 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
244 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
245 |
340 | 246 // Ignores the given key status update |
247 // Used to prevent fall-through, this is the None keyword in KLL | |
248 void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args ) | |
249 { | |
250 // Display capability name | |
251 if ( stateType == 0xFF && state == 0xFF ) | |
252 { | |
253 print("Output_noneSend()"); | |
254 return; | |
255 } | |
256 | |
257 // Nothing to do, because that's the point :P | |
258 } | |
259 | |
260 | |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
261 // Sends a System Control code to the USB Output buffer |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
262 void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
263 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
264 // Display capability name |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
265 if ( stateType == 0xFF && state == 0xFF ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
266 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
267 print("Output_sysCtrlSend(sysCode)"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
268 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
269 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
270 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
271 // Not implemented in Boot Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
272 if ( USBKeys_Protocol == 0 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
273 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
274 warn_print("System Control is not implemented for Boot Mode"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
275 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
276 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
277 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
278 // TODO Analog inputs |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
279 // Only indicate USB has changed if either a press or release has occured |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
280 if ( state == 0x01 || state == 0x03 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
281 USBKeys_Changed |= USBKeyChangeState_System; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
282 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
283 // Only send keypresses if press or hold state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
284 if ( stateType == 0x00 && state == 0x03 ) // Release state |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
285 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
286 USBKeys_SysCtrl = 0; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
287 return; |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
288 } |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
289 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
290 // Set system control code |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
291 USBKeys_SysCtrl = args[0]; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
292 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
293 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
294 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
295 // Adds a single USB Code to the USB Output buffer |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
296 // Argument #1: USB Code |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
297 void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
298 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
299 // Display capability name |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
300 if ( stateType == 0xFF && state == 0xFF ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
301 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
302 print("Output_usbCodeSend(usbCode)"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
303 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
304 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
305 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
306 // Depending on which mode the keyboard is in the USB needs Press/Hold/Release events |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
307 uint8_t keyPress = 0; // Default to key release, only used for NKRO |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
308 switch ( USBKeys_Protocol ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
309 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
310 case 0: // Boot Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
311 // TODO Analog inputs |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
312 // Only indicate USB has changed if either a press or release has occured |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
313 if ( state == 0x01 || state == 0x03 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
314 USBKeys_Changed = USBKeyChangeState_MainKeys; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
315 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
316 // Only send keypresses if press or hold state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
317 if ( stateType == 0x00 && state == 0x03 ) // Release state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
318 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
319 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
320 case 1: // NKRO Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
321 // Only send press and release events |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
322 if ( stateType == 0x00 && state == 0x02 ) // Hold state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
323 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
324 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
325 // Determine if setting or unsetting the bitfield (press == set) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
326 if ( stateType == 0x00 && state == 0x01 ) // Press state |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
327 keyPress = 1; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
328 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
329 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
330 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
331 // Get the keycode from arguments |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
332 uint8_t key = args[0]; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
333 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
334 // Depending on which mode the keyboard is in, USBKeys_Keys array is used differently |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
335 // Boot mode - Maximum of 6 byte codes |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
336 // NKRO mode - Each bit of the 26 byte corresponds to a key |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
337 // Bits 0 - 45 (bytes 0 - 5) correspond to USB Codes 4 - 49 (Main) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
338 // Bits 48 - 161 (bytes 6 - 20) correspond to USB Codes 51 - 164 (Secondary) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
339 // Bits 168 - 213 (bytes 21 - 26) correspond to USB Codes 176 - 221 (Tertiary) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
340 // Bits 214 - 216 unused |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
341 uint8_t bytePosition = 0; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
342 uint8_t byteShift = 0; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
343 switch ( USBKeys_Protocol ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
344 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
345 case 0: // Boot Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
346 // Set the modifier bit if this key is a modifier |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
347 if ( (key & 0xE0) == 0xE0 ) // AND with 0xE0 (Left Ctrl, first modifier) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
348 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
349 USBKeys_Modifiers |= 1 << (key ^ 0xE0); // Left shift 1 by key XOR 0xE0 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
350 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
351 // Normal USB Code |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
352 else |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
353 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
354 // USB Key limit reached |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
355 if ( USBKeys_Sent >= USB_BOOT_MAX_KEYS ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
356 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
357 warn_print("USB Key limit reached"); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
358 return; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
359 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
360 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
361 // Make sure key is within the USB HID range |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
362 if ( key <= 104 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
363 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
364 USBKeys_Keys[USBKeys_Sent++] = key; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
365 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
366 // Invalid key |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
367 else |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
368 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
369 warn_msg("USB Code above 104/0x68 in Boot Mode: "); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
370 printHex( key ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
371 print( NL ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
372 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
373 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
374 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
375 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
376 case 1: // NKRO Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
377 // Set the modifier bit if this key is a modifier |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
378 if ( (key & 0xE0) == 0xE0 ) // AND with 0xE0 (Left Ctrl, first modifier) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
379 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
380 if ( keyPress ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
381 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
382 USBKeys_Modifiers |= 1 << (key ^ 0xE0); // Left shift 1 by key XOR 0xE0 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
383 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
384 else // Release |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
385 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
386 USBKeys_Modifiers &= ~(1 << (key ^ 0xE0)); // Left shift 1 by key XOR 0xE0 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
387 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
388 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
389 USBKeys_Changed |= USBKeyChangeState_Modifiers; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
390 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
391 } |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
392 // First 6 bytes |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
393 else if ( key >= 4 && key <= 49 ) |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
394 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
395 // Lookup (otherwise division or multiple checks are needed to do alignment) |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
396 // Starting at 0th position, each byte has 8 bits, starting at 4th bit |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
397 uint8_t keyPos = key + (0 * 8 - 4); // Starting position in array, Ignoring 4 keys |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
398 switch ( keyPos ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
399 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
400 byteLookup( 0 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
401 byteLookup( 1 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
402 byteLookup( 2 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
403 byteLookup( 3 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
404 byteLookup( 4 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
405 byteLookup( 5 ); |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
406 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
407 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
408 USBKeys_Changed |= USBKeyChangeState_MainKeys; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
409 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
410 // Next 14 bytes |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
411 else if ( key >= 51 && key <= 155 ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
412 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
413 // Lookup (otherwise division or multiple checks are needed to do alignment) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
414 // Starting at 6th byte position, each byte has 8 bits, starting at 51st bit |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
415 uint8_t keyPos = key + (6 * 8 - 51); // Starting position in array |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
416 switch ( keyPos ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
417 { |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
418 byteLookup( 6 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
419 byteLookup( 7 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
420 byteLookup( 8 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
421 byteLookup( 9 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
422 byteLookup( 10 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
423 byteLookup( 11 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
424 byteLookup( 12 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
425 byteLookup( 13 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
426 byteLookup( 14 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
427 byteLookup( 15 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
428 byteLookup( 16 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
429 byteLookup( 17 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
430 byteLookup( 18 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
431 byteLookup( 19 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
432 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
433 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
434 USBKeys_Changed |= USBKeyChangeState_SecondaryKeys; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
435 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
436 // Next byte |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
437 else if ( key >= 157 && key <= 164 ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
438 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
439 // Lookup (otherwise division or multiple checks are needed to do alignment) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
440 uint8_t keyPos = key + (20 * 8 - 157); // Starting position in array, Ignoring 6 keys |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
441 switch ( keyPos ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
442 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
443 byteLookup( 20 ); |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
444 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
445 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
446 USBKeys_Changed |= USBKeyChangeState_TertiaryKeys; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
447 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
448 // Last 6 bytes |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
449 else if ( key >= 176 && key <= 221 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
450 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
451 // Lookup (otherwise division or multiple checks are needed to do alignment) |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
452 uint8_t keyPos = key + (21 * 8 - 176); // Starting position in array |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
453 switch ( keyPos ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
454 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
455 byteLookup( 21 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
456 byteLookup( 22 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
457 byteLookup( 23 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
458 byteLookup( 24 ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
459 byteLookup( 25 ); |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
460 byteLookup( 26 ); |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
461 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
462 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
463 USBKeys_Changed |= USBKeyChangeState_QuartiaryKeys; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
464 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
465 // Received 0x00 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
466 // This is a special USB Code that internally indicates a "break" |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
467 // It is used to send "nothing" in order to break up sequences of USB Codes |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
468 else if ( key == 0x00 ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
469 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
470 USBKeys_Changed |= USBKeyChangeState_MainKeys; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
471 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
472 // Also flush out buffers just in case |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
473 Output_flushBuffers(); |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
474 break; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
475 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
476 // Invalid key |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
477 else |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
478 { |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
479 warn_msg("USB Code not within 4-49 (0x4-0x31), 51-155 (0x33-0x9B), 157-164 (0x9D-0xA4), 176-221 (0xB0-0xDD) or 224-231 (0xE0-0xE7) NKRO Mode: "); |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
480 printHex( key ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
481 print( NL ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
482 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
483 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
484 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
485 // Set/Unset |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
486 if ( keyPress ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
487 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
488 USBKeys_Keys[bytePosition] |= (1 << byteShift); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
489 USBKeys_Sent++; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
490 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
491 else // Release |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
492 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
493 USBKeys_Keys[bytePosition] &= ~(1 << byteShift); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
494 USBKeys_Sent++; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
495 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
496 |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
497 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
498 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
499 } |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
500 |
370
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
501 void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args ) |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
502 { |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
503 // Display capability name |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
504 if ( stateType == 0xFF && state == 0xFF ) |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
505 { |
385
d8f61e15aca1
Adding jump to bootloader key
Jacob Alexander <haata@kiibohd.com>
parents:
370
diff
changeset
|
506 print("Output_flashMode()"); |
370
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
507 return; |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
508 } |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
509 |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
510 // Start flash mode |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
511 Output_firmwareReload(); |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
512 } |
39e338a6733d
Fixing default ErgoDox layout and adding FlashMode button
Jacob Alexander <haata@kiibohd.com>
parents:
347
diff
changeset
|
513 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
514 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
515 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
516 // ----- Functions ----- |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
517 |
300
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
518 // Flush Key buffers |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
519 void Output_flushBuffers() |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
520 { |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
521 // Zero out USBKeys_Keys array |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
522 for ( uint8_t c = 0; c < USB_NKRO_BITFIELD_SIZE_KEYS; c++ ) |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
523 USBKeys_Keys[ c ] = 0; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
524 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
525 // Zero out other key buffers |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
526 USBKeys_ConsCtrl = 0; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
527 USBKeys_Modifiers = 0; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
528 USBKeys_SysCtrl = 0; |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
529 } |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
530 |
7119c2149abb
Fixing compiler errors for usbMuxUart Output module
Jacob Alexander <haata@kiibohd.com>
parents:
275
diff
changeset
|
531 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
532 // USB Module Setup |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
533 inline void Output_setup() |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
534 { |
230
d81ad399c14f
Adding clear screen before usb initializes
Jacob Alexander <haata@kiibohd.com>
parents:
227
diff
changeset
|
535 // Setup UART |
d81ad399c14f
Adding clear screen before usb initializes
Jacob Alexander <haata@kiibohd.com>
parents:
227
diff
changeset
|
536 uart_serial_setup(); |
d81ad399c14f
Adding clear screen before usb initializes
Jacob Alexander <haata@kiibohd.com>
parents:
227
diff
changeset
|
537 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
538 // Initialize the USB |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
539 // If a USB connection does not exist, just ignore it |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
540 // All usb related functions will non-fatally fail if called |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
541 // If the USB initialization is delayed, then functionality will just be delayed |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
542 usb_init(); |
175 | 543 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
544 // Register USB Output CLI dictionary |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
545 CLI_registerDictionary( outputCLIDict, outputCLIDictName ); |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
546 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
547 // Flush key buffers |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
548 Output_flushBuffers(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
549 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
550 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
551 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
552 // USB Data Send |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
553 inline void Output_send() |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
554 { |
420
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
555 // USB status checks |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
556 // Non-standard USB state manipulation, usually does nothing |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
557 usb_device_check(); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
558 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
559 // Boot Mode Only, unset stale keys |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
560 if ( USBKeys_Protocol == 0 ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
561 for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
562 USBKeys_Keys[c] = 0; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
563 |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
564 // Send keypresses while there are pending changes |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
565 while ( USBKeys_Changed ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
566 usb_keyboard_send(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
567 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
568 // Clear keys sent |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
569 USBKeys_Sent = 0; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
570 |
186
50702debf278
Initial MatrixARM implementation
Jacob Alexander <haata@kiibohd.com>
parents:
178
diff
changeset
|
571 // Signal Scan Module we are finished |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
572 switch ( USBKeys_Protocol ) |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
573 { |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
574 case 0: // Boot Mode |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
575 // Clear modifiers only in boot mode |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
576 USBKeys_Modifiers = 0; |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
577 Scan_finishedWithOutput( USBKeys_Sent <= USB_BOOT_MAX_KEYS ? USBKeys_Sent : USB_BOOT_MAX_KEYS ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
578 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
579 case 1: // NKRO Mode |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
580 Scan_finishedWithOutput( USBKeys_Sent ); |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
581 break; |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
582 } |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
583 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
584 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
585 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
586 // Sets the device into firmware reload mode |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
587 void Output_firmwareReload() |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
588 { |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
589 usb_device_reload(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
590 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
591 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
592 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
593 // USB Input buffer available |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
594 inline unsigned int Output_availablechar() |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
595 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
596 return usb_serial_available() + uart_serial_available(); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
597 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
598 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
599 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
600 // USB Get Character from input buffer |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
601 inline int Output_getchar() |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
602 { |
178
555d70c6764d
Removing unnecessary ifdefs
Jacob Alexander <haata@kiibohd.com>
parents:
175
diff
changeset
|
603 // XXX Make sure to check output_availablechar() first! Information is lost with the cast (error codes) (AVR) |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
604 if ( usb_serial_available() > 0 ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
605 { |
178
555d70c6764d
Removing unnecessary ifdefs
Jacob Alexander <haata@kiibohd.com>
parents:
175
diff
changeset
|
606 return (int)usb_serial_getchar(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
607 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
608 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
609 if ( uart_serial_available() > 0 ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
610 { |
178
555d70c6764d
Removing unnecessary ifdefs
Jacob Alexander <haata@kiibohd.com>
parents:
175
diff
changeset
|
611 return (int)uart_serial_getchar(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
612 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
613 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
614 return -1; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
615 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
616 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
617 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
618 // USB Send Character to output buffer |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
619 inline int Output_putchar( char c ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
620 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
621 // First send to UART |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
622 uart_serial_putchar( c ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
623 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
624 // Then send to USB |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
625 return usb_serial_putchar( c ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
626 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
627 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
628 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
629 // USB Send String to output buffer, null terminated |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
630 inline int Output_putstr( char* str ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
631 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
632 #if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) // AVR |
178
555d70c6764d
Removing unnecessary ifdefs
Jacob Alexander <haata@kiibohd.com>
parents:
175
diff
changeset
|
633 uint16_t count = 0; |
263
9afed592bcb5
Preparing for mk20dx256vlh7
Jacob Alexander <haata@kiibohd.com>
parents:
239
diff
changeset
|
634 #elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // ARM |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
635 uint32_t count = 0; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
636 #endif |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
637 // Count characters until NULL character, then send the amount counted |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
638 while ( str[count] != '\0' ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
639 count++; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
640 |
173
afd0f94023ff
Fixed bug with standalone UART CLI
Jacob Alexander <haata@kiibohd.com>
parents:
172
diff
changeset
|
641 // First send to UART |
afd0f94023ff
Fixed bug with standalone UART CLI
Jacob Alexander <haata@kiibohd.com>
parents:
172
diff
changeset
|
642 uart_serial_write( str, count ); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
643 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
644 // Then send to USB |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
645 return usb_serial_write( str, count ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
646 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
647 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
648 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
649 // Soft Chip Reset |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
650 inline void Output_softReset() |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
651 { |
178
555d70c6764d
Removing unnecessary ifdefs
Jacob Alexander <haata@kiibohd.com>
parents:
175
diff
changeset
|
652 usb_device_software_reset(); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
653 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
654 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
655 |
420
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
656 // Update USB current (mA) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
657 // Triggers power change event |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
658 void Output_update_usb_current( unsigned int current ) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
659 { |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
660 // Only signal if changed |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
661 if ( current == Output_USBCurrent_Available ) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
662 return; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
663 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
664 // Update USB current |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
665 Output_USBCurrent_Available = current; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
666 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
667 unsigned int total_current = Output_current_available(); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
668 info_msg("USB Available Current Changed. Total Available: "); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
669 printInt32( total_current ); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
670 print(" mA" NL); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
671 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
672 // Send new total current to the Scan Modules |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
673 Scan_currentChange( Output_current_available() ); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
674 } |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
675 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
676 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
677 // Update external current (mA) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
678 // Triggers power change event |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
679 void Output_update_external_current( unsigned int current ) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
680 { |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
681 // Only signal if changed |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
682 if ( current == Output_ExtCurrent_Available ) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
683 return; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
684 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
685 // Update external current |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
686 Output_ExtCurrent_Available = current; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
687 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
688 unsigned int total_current = Output_current_available(); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
689 info_msg("External Available Current Changed. Total Available: "); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
690 printInt32( total_current ); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
691 print(" mA" NL); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
692 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
693 // Send new total current to the Scan Modules |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
694 Scan_currentChange( Output_current_available() ); |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
695 } |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
696 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
697 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
698 // Power/Current Available |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
699 unsigned int Output_current_available() |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
700 { |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
701 unsigned int total_current = 0; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
702 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
703 // Check for USB current source |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
704 total_current += Output_USBCurrent_Available; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
705 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
706 // Check for external current source |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
707 total_current += Output_ExtCurrent_Available; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
708 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
709 // XXX If the total available current is still 0 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
710 // Set to 100 mA, which is generally a safe assumption at startup |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
711 // before we've been able to determine actual available current |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
712 if ( total_current == 0 ) |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
713 { |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
714 total_current = 100; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
715 } |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
716 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
717 return total_current; |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
718 } |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
719 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
720 |
23a1868b4ac2
Adding dynamic USB power support
Jacob Alexander <haata@kiibohd.com>
parents:
385
diff
changeset
|
721 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
722 // ----- CLI Command Functions ----- |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
723 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
724 void cliFunc_kbdProtocol( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
725 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
726 print( NL ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
727 info_msg("Keyboard Protocol: "); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
728 printInt8( USBKeys_Protocol ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
729 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
730 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
731 |
347
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
732 void cliFunc_outputDebug( char* args ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
733 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
734 // Parse number from argument |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
735 // NOTE: Only first argument is used |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
736 char* arg1Ptr; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
737 char* arg2Ptr; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
738 CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr ); |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
739 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
740 // Default to 1 if no argument is given |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
741 Output_DebugMode = 1; |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
742 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
743 if ( arg1Ptr[0] != '\0' ) |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
744 { |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
745 Output_DebugMode = (uint16_t)numToInt( arg1Ptr ); |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
746 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
747 } |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
748 |
136e47478441
UARTConnect enumeration working!
Jacob Alexander <haata@kiibohd.com>
parents:
340
diff
changeset
|
749 |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
750 void cliFunc_readLEDs( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
751 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
752 print( NL ); |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
753 info_msg("LED State: "); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
754 printInt8( USBKeys_LEDs ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
755 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
756 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
757 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
758 void cliFunc_readUART( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
759 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
760 print( NL ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
761 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
762 // Read UART buffer until empty |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
763 while ( uart_serial_available() > 0 ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
764 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
765 char out[] = { (char)uart_serial_getchar(), '\0' }; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
766 dPrint( out ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
767 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
768 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
769 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
770 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
771 void cliFunc_sendKeys( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
772 { |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
773 // Copy USBKeys_KeysCLI to USBKeys_Keys |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
774 for ( uint8_t key = 0; key < USBKeys_SentCLI; ++key ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
775 { |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
776 // TODO |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
777 //USBKeys_Keys[key] = USBKeys_KeysCLI[key]; |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
778 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
779 USBKeys_Sent = USBKeys_SentCLI; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
780 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
781 // Set modifier byte |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
782 USBKeys_Modifiers = USBKeys_ModifiersCLI; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
783 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
784 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
785 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
786 void cliFunc_sendUART( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
787 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
788 // Write all args to UART |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
789 uart_serial_write( args, lenStr( args ) ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
790 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
791 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
792 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
793 void cliFunc_setKeys( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
794 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
795 char* curArgs; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
796 char* arg1Ptr; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
797 char* arg2Ptr = args; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
798 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
799 // Parse up to USBKeys_MaxSize args (whichever is least) |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
800 for ( USBKeys_SentCLI = 0; USBKeys_SentCLI < USB_BOOT_MAX_KEYS; ++USBKeys_SentCLI ) |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
801 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
802 curArgs = arg2Ptr; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
803 CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
804 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
805 // Stop processing args if no more are found |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
806 if ( *arg1Ptr == '\0' ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
807 break; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
808 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
809 // Add the USB code to be sent |
227
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
810 // TODO |
ed05fa3555d4
Updating usbMuxUart for NKRO
Jacob Alexander <haata@kiibohd.com>
parents:
195
diff
changeset
|
811 //USBKeys_KeysCLI[USBKeys_SentCLI] = numToInt( arg1Ptr ); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
812 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
813 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
814 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
815 |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
816 void cliFunc_setMod( char* args ) |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
817 { |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
818 // Parse number from argument |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
819 // NOTE: Only first argument is used |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
820 char* arg1Ptr; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
821 char* arg2Ptr; |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
822 CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr ); |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
823 |
195
58cfcb7bac88
Changing decToInt to numToInt (adds support for Hex number interpreter)
Jacob Alexander <haata@kiibohd.com>
parents:
192
diff
changeset
|
824 USBKeys_ModifiersCLI = numToInt( arg1Ptr ); |
172
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
825 } |
a30bddad4115
Adding UART and UART + USB muxed CLI output.
Jacob Alexander <haata@kiibohd.com>
parents:
diff
changeset
|
826 |